Category Archives: Tempdb

Reads and Writes per DB, Using DMV’s

So years ago when I was working with a SQL 2000 database I had a need to see how many reads and writes were happening on each DB so I could properly partition a new SAN we had purchased. The SAN guys wanted Reads/Sec and Writes/Sec and IO’s/Sec total. Perfmon couldn’t give this for each DB so I had to use fn_virtualFileStats. I wrote a procedure that would tell me per DB what was going on and then store it down into a table for later comparison.

I’ve found a need for this again since I’m running some load tests and want to know what my data files are doing. This is easier now thanks to sys.dm_io_virtual_file_stats. It’s even better now that so many people in the community provide great content! Glen Alan Berry (Blog | Twitter) wrote and excellent DMV a day blog post series and in one of them he gives a great query on Virtual File stats. This gives you an excellent general point in time look at your server but was not exactly what I needed. I wanted to know for a specific period what were my reads and writes. This works better for my load testing needs to know just what is going on during a specific time.

You might want to use this during heavy business hours as well. The DMV is keeping track since the last Server restart so if you look at just the DMV you’re going to see everything that has occurred. Maintenance items (checkdb, Indexes, Backups) will all show up inside there so one DB might be very large in size and at night when the backup kicks off it might be using lots of Reads making it’s percent much higher but during the day no one really uses the DB so the DMV might show you that the DB is very busy when in reality your other DB’s are the busy one’s during the day. So If I’m planning for a new SAN or moving around files I would run this query at specific times so I could compare data points and find out what my databases are actually doing during critical times.

This script takes a Baseline record on the DMV. It then waits the amount of time you specify and takes a comparison line. It then compares the two and returns the percent’s. Lots more could be done with the comparison and certain things I’ve left in for later changes like Size. Right now I don’t do anything with Size but I plan to show the growth from the data points. I chose not to create the script as a stored proc just so it’s easy for you to put where you want. It only deals with 2 data points to keep it simple for now I have considered changing this in the future. The only setting you need to change is the @DelaySeconds parameter. Just set that to the number of seconds you want it to wait. 60 seconds is usually a good default to get a quick snapshot on the server. My suggestion to discover what your databases are doing during busy times I would probably run it for about 300 seconds (5 minutes) and then do that 2-3 times in an hour to see what the data looks like.

Would love to hear any comments on if this works for you!  Thanks.

File Stats Per DB
Date Created: 07-22-2010
Written by Pat Wright(@SqlAsylum)
This Scrpit is Free to download for Personal,Educational, and Internal Corporate Purposes,
provided that this main header is kept along with the script.  Sale of this script is
Prohibited in whole or in part is prohibited without the author’s consent.

[databaseName] [NVARCHAR](128) NULL,
[FileType] [NVARCHAR](60) NULL,
[physical_name] [NVARCHAR](260) NOT NULL,
[DriveLetter] VARCHAR(5) NULL,
[BytesRead] [BIGINT] NOT NULL,
[BytesWritten] [BIGINT] NOT NULL,

DECLARE @DelaySeconds INT

–Set Parameters
The counter is just to initialize the number to 1
The Delayseconds Tells SQL Server how long to wait before it runs the second data point.
How long you want this depends on what your needs are.  If I have a load test running for
5 minutes and I want to know what the read and Write percents were during those 5 minutes
I set it to 300. If I just want a quick look at the system I’ll usually set it to 60 seconds,
To give me a one minute view.  This depends on if it’s a busy time and what’s going on during that time.
SET @Counter = 1
SET @DelaySeconds = 60
SET @TestTime = DATEADD(SS,@delayseconds,GETDATE())

WHILE @Counter <=2
#FileStatsPerDb (DatabaseName,FileType,Physical_Name,DriveLetter,READS,BytesRead,Writes,BytesWritten,SIZE)
DB_NAME(mf.database_id) AS DatabaseName
,Mf.Type_desc AS FileType
,Mf.Physical_name AS Physical_Name
,LEFT(Mf.Physical_name,1) AS Driveletter
,num_of_reads AS READS
,num_of_bytes_read AS BytesRead
,num_of_writes AS Writes
,num_of_bytes_written AS BytesWritten
,size_on_disk_bytes AS SIZE
FROM sys.dm_io_virtual_file_stats(NULL, NULL) AS fs
JOIN sys.master_files AS mf ON mf.database_id = fs.database_id
IF @Counter = 1
TIME @TestTime
@Counter = @Counter + 1

WITH FileStatCTE (Databasename,Filetype,Driveletter,TotalReads,TotalWrites,TotalSize,TotalBytesRead,TotalBytesWritten)
(SELECT BL.Databasename,BL.FileType,Bl.DriveLetter,
NULLIF(SUM(cp.Readsbl.Reads),0) AS TotalReads,
NULLIF(SUM(cp.Writesbl.Writes),0) AS TotalWrites,
NULLIF(((SUM(cp.Sizebl.Size))/1024),0) AS TotalSize,
NULLIF(((SUM(cp.BytesReadbl.BytesRead))/1024),0) AS TotalKiloBytesRead,
NULLIF(((SUM(cp.BytesWrittenbl.BytesWritten))/1024),0) AS TotalKiloBytesWritten
( SELECT insertdate,Databasename,FileType,DriveLetter,READS,BytesRead,Writes,BytesWritten,SIZE
FROM #FileStatsPerDb
WHERE InsertDate IN (SELECT MIN(InsertDate) FROM #FileStatsPerDb) ) AS BL –Baseline
( SELECT insertdate,Databasename,FileType,DriveLetter,READS,BytesRead,Writes,BytesWritten,SIZE
FROM #FileStatsPerDb
WHERE InsertDate IN (SELECT MAX(InsertDate) FROM #FileStatsPerDb) ) AS CP — Comparison
ON BL.Databasename = cp.Databasename
AND bl.filetype = cp.filetype
AND bl.DriveLetter = cp.DriveLetter
GROUP BY BL.databasename,BL.filetype,Bl.driveletter)

Return the Read and write percent for Each DB and file.  Order by ReadPercent
SELECT databasename,filetype,driveletter,
100. * TotalReads / SUM(TotalReads) OVER() AS ReadPercent,
100. * TotalWrites / SUM(TotalWrites) OVER() AS WritePercent
ORDER BY ReadPercent DESC,WritePercent DESC

In my haste I forgot to add a sample of what you would get from this.  The names of the DB’s have been changed.